Resetting kwikset smartkey code#
The lock is pre-programmed with a default User Code of 1-2-3-4. It is recommended that you change it to a code of your own. Make sure it unlocks the door.The default Mastercode is 0-0-0-0. Test the default User Code: Enter the default User Code (1-2-3-4), then press. Test the lock: With the door open and unlocked, Press the lock button. If unsuccessful, the keypad will flash red and you will hear 3 beeps (make sure the door is open and unlocked and that you are using a fresh set of batteries).6. If successful, the keypad will flash green and you will hear 2 beeps. The latch bolt will extend and retract to learn the orientation of the door. Enter the default Mastercode (O-O-O-0).3. Press and hold the Reset button for 5 seconds, until you hear 3 long beeps.2.
Resetting kwikset smartkey how to#
How to restore default settingsThis procedure will delete all User Codes associated with the lock, and the default Mastercode (0-0-0-0) and User Code (1-2-3-4) will be restored.1. How to restore default settings on my Powerbolt 2? Perform a factory reset It is recommended that you delete this code. Enter the default User Code (1-2-3-4), then press the Lock symbol. Test the default User Code: Activate the screen. With the door open and unlocked, press the Lock symbol. If unsuccessful, you will hear 3 beeps (make sure the door is open and unlocked and that you are using a fresh set of batteries).Ħ. Enter the default Programming Code (O-O-O-0).ģ. Press and hold the Reset button for 5 seconds, until you hear 3 long beeps.Ģ. This procedure will delete all User Codes associated with the lock, and the default Programming Code How to restore default settings on my 275 Contemporary Deadbolt? Perform a factory reset If the fob will be used frequently in your Kevo system, it is highly recommended that you perform the calibration process for added security. When it turns solid green, the fob is successfully enrolled.Bring your fob and standard key outside with you and test to make sure that Kevo is communicating with your fob to lock and unlock. The fob’s LED will begin to blink faster. The fob’s LED will begin to blink green.Press and release the Program buttonHold the fob close against the back panel. You will still be able to send eKeys to anyone who previously had an active eKey at the time of reset.Fobs:After a system reset, all fobs will need to be re-enrolled and calibrated.Press and release the fob’s enroll button. Your eKeys never expire, so you will still be able to send them after a reset.Smart devices:After a system reset, you will need to re-enroll and calibrate your Owner phone.
If you wish to reset your Kevo, press and hold down the reset button for 10 seconds until the lock beeps and the lock face LEDs flash red.Note: You will need to re-enroll your Owner phone and fobs, and you will need to resend eKeys to your Kevo users. For your convenience, we've created an easy to follow interactive guide on how to perform a factory reset.
0 kommentar(er)
